UPM-DT-10PA超聲功率計

美國ohmic upm-dt-10pa超聲功率計，20 mw分辨率
ohmic儀器型號upm-dt-1pa和upm-dt-10pa超聲功率計是精密的瓦特表，用于測量診斷和治療超聲波傳感器的功率輸出。upm-dt系列自1986年以來一直在全球范圍內使用，并符合fda，jcaho，aami和aium推薦的測試指南。功率通過輻射方法測量，upm-dt的精度可溯源至nist。
upm-dt-10pa超聲功率計的特點：
•五點認證（nist 可追蹤）
•高分辨率： 2或20 mw（以克模式為1.5或15 mw）
•測量范圍：0-30瓦
•頻率范圍： .5至10 mhz
•測量全部脈沖或連續功率
•自動歸零和穩定
•數字顯示和rs-232接口
•配有便攜箱
upm-dt-10pa超聲功率計包括的以下附件：
金屬外殼 - 黑色
通用電源
1克校準重量
nist可溯源校準證書
用戶手冊
ohmic instruments models upm-dt-1pa & 10pa are precision wattmeters designed to measure the power output of diagnostic and therapeutic ultrasound transducers. the upm-dt series have been in use worl**ide since 1986 and conform to the testing guidelines recommended by fda, jcaho, aami and aium. power is measured by the radiation methodand the accuracy of the upm-dt’s are traceable to nist.
features for the upm-dt-10pa:
• five point certification (nist traceable)
• high resolution: 2 or 20 mw (1.5 or 15 mw in grams mode)
• measurement range: 0-30 watts
• frequency range: .5 to 10 mhz
• measures total pulsed or continuous power
• automatic zeroing and stabilization
• digital display and rs-232 interface
• equipped with carrying case